Publicidad
Idiomas disponibles
Idiomas disponibles
handrail elements A13 to articles B33 using the glue (X01). Saw off the excess handrail next
to the first and last baluster using a hacksaw and complete assembly by inserting element A12
using article C64 and glue X01 (fig. 1).
18. Insert the steel cables F26 (fig. 7) into articles D39 found on the balusters. Secure the cables
to one of the ends using articles D4 and C76, leaving an extra 15 mm of cable protruding from
article D40. Tighten the cables by hand and secure using articles D40 and C76. Cut the cables
at a distance of 15 mm from article D40. Secure articles D38 to protect the cables with articles
C76. Warning: when cutting the cables, we recommend winding the part in question with adhesive
tape to avoid fraying and using a suitable shearer.
Final Assembly
19. Check the verticality of the entire staircase and - if necessary - correct by moving support N16
(fig. 1).
20. Dismantle the first tread (L40) and drill the floor using a Ø 14 mm point in the same place as the
openings found on support N16 (fig. 1).
21. Insert elements C39 and secure in a permanent manner (fig. 1).
22. Remount the first tread (L40).
23. Insert articles C74 into balusters C67 to complete staircase assembly (fig. 1).
066526000_ISTR_MONT_MINI LINE_DUM_04_2021.indd 7
7 - MINI LINE
02/04/2021 14:14:03
Publicidad
