Target Group For This Manual; Intended Use; Fitting The Fastening Frame - Dometic SP950C Instrucciones De Montaje

CoolAir SP950C, SPX1200C
3

Target group for this manual

The installation information in this manual is only intended for qualified personnel at
workshops, who are familiar with the guidelines and safety precautions to be applied
during the installation of vehicle accessory parts.
4

Intended use

The fastening frame is used for installing the condenser unit SP950C or SPX1200C
for the parking cooler SP950 or SPX1200, respectively, to the following vehicles:
Renault Trucks T. The fastening frame is attached on the left of the rear cab wall.
When fastening the fastening frame, use existing fastening points on the vehicle. You
do not need to drill new holes.
5

Fitting the fastening frame

A
NOTICE!
Observe the information in the installation manual when fitting the
parking cooler.
I
NOTE
Operating instructions can be found in the operating manual for the
parking cooler.
Basic assembly is described in fig. 1, page 3:
Item Designation
1 Fastening frame
2 Condenser unit
3 Cover
EN
Target group for this manual
7