Set Timer; Set Mms Mode; Enter Password - Braun BLACK400phone Manual Del Usuario

e) Press down the select switch to save the current setting, then press MENU to
return to info display.
f) Press MENU to cancel setting and return to info display.

4.1.18 Set Timer

This parameter defines a certain time lapse in a day when the Camera can be
triggered. In the rest of the time the device is shut off. The effective value of the hour
ranges from 0 to 23 while the minute ranges from 0 to 59.
Provided that the camera should work from eight a.m. to five p.m., the steps are as
follows:
a) Press MENU to display the setting menu.
b) Press RIGHT to select System.
c) Press DOWN to select Timer.
d) Press RIGHT to select item, press UP or DOWN to change the value until the
start time changes to 8 and the stop time changes to 17.
e) Press down the select switch to save all current setting, then press MENU to
return to info display.
f) Press MENU to return to previous menu.

4.1.19 Set MMS Mode

The following shows how to set the MMS mode to Off, provided that the previous
option is On:
a) Press MENU to display the settings menu.
b) Press RIGHT to select MMS.
c) Press DOWN to select MMS.
d) Press RIGHT to select Off.
e) Press OK to save the current settings, then press MENU to return to info
display.
f) Press MENU to cancel settings and return to info display.

4.1.20 Enter Password

If the password setting is selected as On, after switching on the camera, the LCD
screen on camera will prompt to enter password. The default password is off. It can
be changed where the steps are as following:
a) Press MENU to display the settings menu.
b) Press RIGHT to select SYSTEM.
c) Press DOWN to select PASSWORD.
d) Press Up to select On, then press RIGHT to select 4 numbers as password.
e) Press OK to save the current settings, then press MENU to return to info
display.
f) The LCD screen will prompt to enter the password next time you switch on the
camera.
21