Publicidad
assembling the highchair for stage 2 & 3
fig 13
fig 14
Insert the upper and lower back rests
into the appropriate slots at the top
of the legs. Insert a barrel nut into each
of the pre-drilled holes at either end
of the back rests. Using a flat headed
screw driver ensure that the barrel nuts
Select the desired position and
firmly push the foot rest into the chair
frame until the front of the foot rest is
level with the front of the high chair.
Please ensure that the foot rest isn't
twisted by selecting slots of
a corresponding height. Once you are
happy with the position of the seat
and foot rest please tighten all screws,
being careful not to overtighten and
damage the wood.
are horizontal and
use the Allen key
and screws
provided to
attach both of
the back rests.
9
Publicidad
