3 FIXED OR SWIVELLING FRONT WHEELS:
Fixed front wheels: lower the wheel locking lever (fig. a).
Swivelling front wheels: lift the wheel locking lever (fig.
b).
4 HOOD:
It is possible to extend the hood (fig. a).
This is equipped with a window so you can check on
your child (fig. b).
The last section of fabric can be folded away (fig. c).
5 BACKREST ADJUSTMENT:
Lift the handle placed on the backrest to adjust the
latter to the desired height (fig. a).
To raise the backrest, pull the ring upwards as shown
in the figure (fig. b).
6 BRAKE:
To lock the stroller press on the brake lever.
Do the opposite to release the brake.
7 FIVE POINT SAFETY HARNESS: to fasten it, push the two
waist strap buckles (with the shoulder straps attached
(arrow_1) into the leg divider until they click into place
(arrow_2). To unfasten it, press the round button in the
centre of the buckle (arrow_3) and pull the waist straps
out (arrow_4).
8 To tighten the waist strap, pull on both sides in the
direction of the arrow (arrow_5). To loosen it, move it
in the opposite direction.
To adjust the length, slide the buckles until the straps
are taut around the child's body (arrow_6).
9 ADJUSTING THE FOOTREST:
To adjust the footrest to the desired position, press the
lever located underneath.
10 CLOSING THE STROLLER:
The front wheels must be set to swivelling.
Taking hold of the handlebar, push the red tab to the
left (arrow 1) and at the same time press the button
beneath the handle (arrow 2), then lower the stroller
downwards (arrow 3) to close it.
Once folded, the stroller stands upright.
11 REMOVING THE FRONT WHEELS:
To remove the front wheels and reduce the overall
dimensions of the stroller, press on the tab and pull
them out (fig. b).
PRODUCT INFORMATION
12 Product information.
This information is essential in the event of a
complaint.
CLEANING AND MAINTENANCE
Cleaning must only be carried out by adults.
PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place. The maintenance have to be
regularly.
CLEANING THE CHASSIS: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and free
of dust and sand and, if necessary, lubricate with light
machine oil.
CLEANING FABRIC PARTS: Brush the fabric parts to
remove dust.
• When washing, closely follow the instructions stated
on the label sewn into the cover.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
• Do not remove stains with solvents.
• Do not tumble dry.
BURIGOTTO
AFTER-SALES SERVICE
If any parts of the item get lost or damaged, only
use genuine
Burigotto
replacements, information on the products and sales
of genuine spare parts and accessories, contact the
PegPerego Assistance Service and state the serial
number of the product.
tel. 0039/039/60.88.213
e-mail
customerservice@burigotto.com
website www.burigotto.com
All intellectual property rights on the contents of
this manual are property of PegPerego S.p.A. and are
protected by the laws in force.
- 9 -
spare parts. For any repairs,