Short Cord Instructions; Before The First Use - Kalorik EKP 47828 Manual De Instrucciones

SHORT CORD INSTRUCTIONS

A short power supply cord is provided to reduce the hazards resulting
from becoming entangled in, or tripping over a longer cord. Extension
cords may be used if care is exercised in their use.
• The electrical rating of the extension cord should be at least that of
the appliance. If the electrical rating of the extension cord is too low,
it could overheat and burn.
• The resulting extended cord should be arranged so that it will not
drape over the countertop or tabletop where it can be pulled on by
children or tripped over.

BEFORE THE FIRST USE

This product has been designed to offer you independent cooking
controls for optimum cooking flexibility.
• Remove all packing materials.
• Wash the pots and wipe down the triple burner base. Make sure all
items are dry before using.
• Place on a dry, flat, level, and heat-resistant surface, close to an
electric socket.
• For proper ventilation provide at least 4-6 in (10-15 cm) of space
above and around the appliance.
• Before using for the first time, turn the hot plates on to the highest heat
setting and heat up for 10 minutes. This will burn off any residue left
from manufacture.
• Some odor and smoke could develop during this process, ensure
good ventilation and it should disappear after few minutes of use.
•
Set the power dials back to off and allow the unit to cool down
completely. The cooking plates are now ready for use.
•
Keep the surface of the heating element clean and dry.
•
NOTE: This should be the only time the hot plates are turned ON
without cooking utensils on them.
www.KALORIK.com
5
EKP 47828 – 200605