Uline Royal Н-3956 Manual Del Usuario página 8

MONTHLY
1. Cleaning – Inspect and clean the vacuum,
including the fan chamber and under the hood.
2. Electrical – Inspect the cord assembly for wear and
check for proper handle assembly.
3. Handle – Check the handle assembly for tightness,
and replace handle bolts if missing.
OPERATING ISSUE
Vacuum won't turn on.
There is little to no suction.
Vacuum is hard to push.
Vacuum has a burning smell.
PAGE 8 OF 26
ROUTINE MAINTENANCE CONTINUED
TROUBLESHOOTING
1. Plug cord in firmly.
2. Check fuse and breaker.
3. Replace fuse or reset breaker.
4. Allow vacuum to cool for 30 minutes.
1. Clear any blockage in hose or base of vacuum.
2. Move nozzle control knob to lower setting.
3. Change filter bag.
4. Replace belt.
5. Replace brush roll.
6. Check to make sure filter is clean.
1. Move carpet height control to a higher setting.
1. Check for clogs in hose and base of vacuum.
2. Replace belt.
1-800-295-5510
uline.com
4. Motor – The Uline repairs team should make a
routine inspection of the motor every six months.
Check the motor immediately if there are any
unusual sounds or if poor performance occurs.
5. Filter – Check the washable, reusable filters for clogs
and clean or rinse as needed.
NOTE: There are two filters and both are washable.
If vacuum loses suction or if filters are not clean
after washing, filters may need to be replaced.
RECOMMENDATIONS
0721 IH-3956