U-Line H-727 Guia Del Usuario página 2

Figure 5
G
Figure 6
H
Figure 7
Figure 8
E
PAGE 2 OF 6
TAPE ROLL INSTALLATION CONTINUED
F
OPERATION
D
1-800-295-5510
uline.com
5. To thread the tape, hold down trigger and thread
tape leader around front rollers. Make sure one end
of leader is inserted into take-up spool (F) and other
end of leader stops at point (G) as shown. Replace
liner retainer and close cover. (See Figure 5)
1. To start dispensing, place roller (H) on surface.
Depress trigger and pull dispenser. (See Figure 6)
2. To stop dispensing, keep roller on surface, stop
rolling, release trigger and pull dispenser to break
the adhesive. (See Figure 7)
3. To remove rewound liner, rotate and remove liner
retainer (D). Remove liner. (See Figure 8)
4. To remove tape core, push hook (E) and remove
tape core. (See Figure 8)
1020 IH-727