Care And Cleaning - Room&Board Adara Serie El Manual Del Propietario

Inspecting Your Fire Table
!
WARNING
DO NOT inspect, clean, move or store your fire table until the flames are COMPLETELY out and all
parts are cool to the touch.
Your fire table should be inspected regularly to ensure that it is safe to use and to extend the life
of its parts. Check the burner and open the access door to see all the components.
To inspect your fire table follow these steps.
1. Make sure all parts are securely fastened in place. If a part moves when touched, check its
connection points to see if they are loose.
2. Check all connections for leaks using the leak check method described in the "Check for Leaks"
section of this manual.
3. Check the ignition system by pushing the igniter button and verifying that a spark is being
generated in the igniter housing.
4. Visually check all components for any signs of damage, rust, or excessive wear.
5. If damage or leaks of any kind are found, DO NOT operate the fire table until the proper repairs
have been made.
!
WARNING
DO NOT tamper with this fire table. This is dangerous and will void the warranty.
Repairs and modifications must be approved by Real Flame and completed by a professional gas
technician.
This fire table has been tested and certified by a third party certification agency based on its
specific and unique parts. Installing any other parts will void both the certification and the
warranty. For approved replacement parts, contact Real Flame at: 1-800-654-1704
General Care and Cleaning
After repeated use, a slight discoloration or weathering of the fire table finish may occur. Your fire
table should be cleaned regularly to ensure safe use and extend its life.
General Cleaning
Make a cleaning solution using a mild soap mixed with water. Use a soft cloth to wipe down
exterior surfaces and rinse with clean water. Never use oven cleaners or abrasive solvents as these
will damage the fire table.
Burner
The burner should be kept clean to ensure proper operation. Clogged burn ports may be cleared
with a paper clip or pin. Debris in the burner can be cleaned using compressed air or a pipe brush.
Soot
After use it is possible for soot to develop on some surfaces, this soot deposit will usually come off
with water and mild soap.
Storage
1. Turn the gas supply off at the tank. Remove the tank and store it in a cool, dry location, outside
and away from children.
2. Secure all loose filler material or parts.
3. Cover your fire table when it will not be in use. Covering the table will help to protect the
internal components from dirt and debris, prevent water from pooling on the surfaces and
prevent the finish from fading and discoloring.
4. Store the fire table in a cool, dry location away from children and pets.
5. Store the valve key in a secure location.
All manuals and user guides at all-guides.com

CARE AND CLEANING

12