To Take Temperature; Measurement Hints; To Read And Delete Memory - in4 care KI-8210 Manual Del Usuario

To Take Temperature

1. Press and release the POWER
button to turn on the unit.
(Figure 1) Two beeps are heard.
The display shows the unit is
now ready for measurement.
(Figure 2)
2. Place the probe in the middle of
the forehead then press and
hold the POWER button.
3. Move the probe across the left
or right side of the forehead to
measure. Ensure proper contact
between forehead and probe.
During measurement the
display shows an "arrow" sign
(Figure 3) and a measurement
indicator sound should be
heard. (Releasing the POWER
button within 5 seconds will stop
measurement or it will stop
automatically after 5 seconds.)
E4
Information You Should Know
4. When you hear a "beep-
beep"sound, it means the
measurement is completed.
(Figure 4)
5. You can repeat measurement
by pressing the POWER button
again after 5 seconds when the
happy face icon stops flashing.
6. The unit will automatically shut
off after one minute of non use.
(Figure 5)
MEMORY
(Figure 1)
MEMORY MEMORY
(Figure 2) (Figure 3)
MEMORY MEMORY
(Figure 4) (Figure 5)

Measurement Hints

1. Between measurements, please
allow at least a 5-second break
in order to obtain the most
accurate measurement.
2. Because the thermometer is a
very sensitive unit, it must be
used at room temperature 16˚C
~ 40˚C (60.8˚F~104.0˚F).
Warning: Performance of the unit
may be degraded if it is operated
or stored outside the stated
temperature and humidity range,
or if patient's temperature is below
the ambient (room) temperature.

To Read and Delete Memory

Preparation for Use
1. If the power is on, wait for auto power
off after one minute of non use.
2. Press and hold the POWER button
for about 2 seconds, the unit will
display the last stored temperature.
MEMORY MEMORY
3. Press the POWER button again to go
to previous memories.
MEMORY MEMORY
To delete Memory
1. While the screen displays the
memory to be deleted, press and
hold the POWER button for about 3
seconds, the LCD will show "dEL."
2. Press and hold the POWER button
again to delete the stored value.
MEMORY
MEMORY
MEMORY
E5