Dentatus Profin PDX Instrucciones - Mantenimiento página 6

How to use.
Selection of tips
The selection of diamond grit is depending on the
amount of material that has to be reduced. A general
recommendation is the more material the more coarse
diamonds. The removal of material and finishing should
be made in steps.
NOTE: Never go from super-coarse to super-fine in one
step, but use intermediate medium-coarse tips.
NOTE: The black Tungsten-Carbide-coated tips can
always be used for finishing when there is a risk for
abrasion on enamel, since Tungsten Carbide does not
scar or scuff enamel.
NOTE: The wearing of the Diamond Tips is low. The
durability is depending on the circumstances, for
continued efficiency it is recommended not more than
30-40 times.
NOTE: Plastic tips are for single use.
Prepare your Profin for work
Apply the tip in the piston. Check for secure seating by
pulling the tip with your fingers. A firm resistance should
be sensed. If tip comes out easily, try another tip or
send handpiece for service.
All manuals and user guides at all-guides.com
Examples of use
- On enamel, metallic, ceramic and
composite restorations
- For refining gingivial and incisal
embrasures to natural forms
- To contour and individualize anterior
restorations
- To reshape and polish tooth
contacting areas
- To chairside correction and refinishing
margins prior to cementation
5