Tristar BL-4427 Manual De Usuario página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 16
All manuals and user guides at all-guides.com
Operation and maintenance
Remove all packaging of the device.
Check if the voltage of the appliance corresponds to the main voltage of your home.
Rated voltage : AC220-240V 50Hz, rated power 350-400 Watt.
Figure A
Before placing the transparant jar (No 4) at the base (No 7), make sure the power cord is
unplugged from the power outlet and the speed selector (No 6) is in the 0 position.
Figure B, C & D
To place the jar (No 4) on the base (nr.7), turn the lid counterclock-wise.
Make sure the symbol at the bottom of the jar (
the base till you hear the click, otherwise the device will not work for security reasons.
To obtain the jar from the base, turn the jar clockwise.
To remove the lid (No 3) of the jar (No 4), press the release button (No 2) and turn the lid
counter-clockwise off. To place the lid back to the jar, turn the lid clockwise, until you hear the
"click". If the lid is not properly placed, the device will not operate for security reasons.
CAUTION! The knives in the jar are very sharp, be careful with the cleaning.
Avoid any contact with the blades, they can seriously injure.
Place your ingredients in the jar. The maximum capacity of the
jar is 1.2 liters. For slow operation turn the speed selector to
position 1. For fast operation turn the speed selector to position
2.For a short swift operation, select the Pulse mode, you have to
keep the switch by hand in this mode, it is only permitted to use
this mode for only 1 minute because of possible overheating of
the engine. Let the device cool down for further use.
Cleaning of the device.
1. Unplug the appliance from the wall outlet before cleaning.
2. The jar, lids and blades can be washed under running watter
or can be placed in the dishwasher.
3. The base can be wiped with a damp cloth,
never immerse the base or power cord into water for cleaning
4. After cleaning all parts need to be dried to avoid bacterial
grow an electrical shocks.
) is exactly above the sign ▲ at the top of
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido