All manuals and user guides at all-guides.com
Note: When pressing
to power on, the unit will come back on to the factory pre-sets.
4 Other notes
1. The screen has a back light. It will turn off after 1 minute if you don't press any buttons. It will light
up again if you press any button.
) after 1 minute if you don't
2. The unit has a button lock function. The buttons will be locked (
press any buttons.
To open lock: press
and
at same time.
3. Time will be reset to 00:00 if you unplug the unit, or if there is a power cut.
4. This heater includes an overheat protection system that shuts off the heater when parts are
getting excessively hot.
5.
will only show when the unit is heating.
6. The units will always go into free use mode from standby mode.
7. The unit will return to last running mode when powered off and on.
-37-