Floor Boar 10-452 Instrucciones De Funcionamiento página 5

Directional Switch
(Forward Cutting Direction)
Figure C
Notch Cuts:
1. Mark the notch you want to cut out. Notches are used around door ways or other obstructions in
the perimeter of the floor.
2. Cut along the mark and once the desired notch length has been reached, flip the directional lever
and completely back out of the laminate plank (Figure D).
3. Repeat the process for the other side of the notch (Figure D-1).
Figure D
(Reverse Cutting Direction)
Figure C-1
Figure D-1
– 3 –
Directional Switch