Installation
If the freezer
compartment door
is lower than the
refrigerator
compartment door
If the freezer
compartment door
is higher than the
refrigerator
compartment door
-
Type 1
If the freezer
compartment door
is higher than the
refrigerator
compartment door
-
Type 2
CAUTION
After leveling the
door height
12
All manuals and user guides at all-guides.com
Height adjustment
(First identify your screw type, it could vary)
Make them level by inserting at (- type) driver into the groove of the left height adjusting
screw and rotating it clockwise (
Make them level by inserting at (- type) driver into the groove of the right height
adjusting screw and rotating it clockwise ( ).
Adjust the level when the refrigerator door is lower than the freezer door during the
use of the refrigerator.
1. Using the narrow side of the tool for adjustment, turn the adjustment hinge pin
(
) clockwise or (
freezer door.
2. After setting the level of the door, turn the keeper nut(
tighten.
Do not force too hard to level the height. The hinge pin can be pulled out.
(Adjustable range of height is a maximum of 1/2" (1,27 cm))
The refrigerator door will close smoothly by raising the front side by adjusting the
height adjusting screw. If the door does not close properly because it is improperly
adjusted, the performance of the refrigerator will be a ected.
).
Adjustment
2
hinge pin
Down
) counterclockwise to level the refrigerator and
Tool for
1
adjustment
Up
) counterclockwise to