Uline H-7604 Instrucciones De Montaje página 2

2. Attach axles to gate. Using 7/16" wrench, secure with
7/16" hex bolts. (See Figure 2)
NOTE: Center axle should have swivel casters.
Outer axles should both have locking casters.
Figure 2
1. Center the sign on the middle post at desired height.
2. Attach sign to center post of gate using adhesive
strips included with the sign.
NOTE: For more permanent installation, see
step 3.
3. Using self-tapping screws, attach sign to center post
of gate. (See Figure 4)
NOTE: Holes for sign are not pre-drilled. Apply
pressure with self-tapping screws to puncture
post with electric drill (recommended).
PAGE 2 OF 6
ASSEMBLY CONTINUED
SIGN INSTALLATION (OPTIONAL)
1-800-295-5510
uline.com
3. Attach handles and chains to the gate using the
included screws. (See Figure 3)
Figure 3
Figure 4
1120 IH-7604