Using The Remote Control - Oglo MS-O-400-D Manual Del Usuario

Remote control
INSERTING BATTERIES INTO THE REMOTE CONTROL
The remote control works with two AAA LR03 1.5 V batteries.
•
We recommend using only alkaline batteries.
•
Remove the batteries from the remote control if you are not going to use it for a long time (more than
•
a month).
Used batteries must be disposed of safely. Place them in specially designated collection bins to
•
protect the environment.

USING THE REMOTE CONTROL

Aim the remote control at the infrared sensor on the front of the micro hi-fi system at a 60° angle so
•
that the micro hi-fi system receives the transmitted information.
The remote control has a range of 8 meters.
•
Make sure that there are no obstacles between the remote control and the infrared sensor and that
•
no sunlight or other light source is reflected on them.
30 30
Open the cover on the back of the remote control.
1.
Place the batteries in the remote control, respecting the +
2.
and - polarities indicated.
Put the cover back on.
3.