AVS Ventvisor Deflector Instrucciones De Instalación

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents - 2 Piece Set
Contents - 4 Piece Set
Driver Side
Visor
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Clean the painted surface where the visor will
mount with an alcohol pad.
1
Note: Visors mount on the outside painted
surface of the door frame.
Installation Instructions
Ventvisor
Driver Side
Visor
Passenger Side
Visor
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
Deflector
®
Passenger Side
Visor
Rear Driver
Side Visor
Rear Passenger
Side Visor
Clean Towel
Remove the tape liner from the rear flange. Peel back
2" (5cm) of tape liner from each end of top flange.
free end
2
front flange
Page 1 of 2
I - Sheet Number VV57 Rev.B
Alcohol Pad x2
Alcohol Pad x4
free end
top flange
rear
flange