Error Detection; Technical Data - Waeco mobitronic 830-012PP Instrucciones De Servicio

Collected_MB-830_q6.qxd
Error
No output voltage
Alarm tone during the operation
Unit switches On/Off cyclically
The inverter switches off when
the power consuming unit is
switched on.
Article No.
Input nominal voltage:
Permanent output capacity (>4 hrs.):
Permanent output capacity (30 min.):
Peak output capacity (0.1 sec.):
Output voltage
Output frequency:
Efficiency with nominal output:
No-load current consumption:
Maximum ambient temperature:
Dimensions W x H x D (mm):
Weight
Subject to changes due to technical progress and availability.
Reference! The output voltage of this rectangle inverter can be measured only correctly with an analog indicator
(pointer instrument).
If you have further questions about the inverter, please contact:
WAECO UK Ltd.
UK-Broadmayne · Dorset DT2 8LY
Unit G1 · Roman Hill · Business Park
phone: +44 1305 854000 · fax: +44 1305 854288
Internet: www.waeco.com
08.06.2004 15:20 Uhr

Error detection

Cause
Battery voltage is smaller than
10 V (830-012PP)
or 20 V (830-024PP)
Thermal overload
Fuse is defective (in the Pocket
Power or in the vehicle)
Battery voltage is under
10.7 V (830-012PP)
or 21.4 V (830-024PP)
Poor contact at the battery with
load
Permanent load is too high
Switch-on current is too high

Technical data

830-012PP
European plug Safety plug/UK version
10 V~15 V +/- 0.3 V
280 W
300 W
600 W
210-230 V AC
50 Hz
90 %
<0.15 A
40 °C
105 x 57 x 165 103 x 65 x 205
0.7 kg
Seite 9
Troubleshooting
Load battery (start motor)
Switch off power consuming unit
let Pocket Power cool down and
provide for better ventilation
Fuse to be replaced by a
qualified electrician
Charge battery
Cleaning the contacts
Reduce load
Comparison of the unit capacity
with the maximum capacity of
the Pocket Power
830-024PP
European plug
20 V~30 V +/- 0.6 V
210-230 V AC
105 x 57 x 165 103 x 65 x 205
0.8 kg 0.7 kg
Safety plug/UK version
280 W
300 W
600 W
50 Hz
90 %
<0.15 A
40 °C
0.8 kg
9