Franke FCBU 1204 2M C WH Manual De Uso página 10

Controls
L
Button Function
L
Turns the lights on/off at maximum strength.
Press and hold for approx. 2 seconds to turn the lighting system on and off at reduced intensity. -
T1
Turns the motor on/off at speed one.
Delay function:
Press and hold the button for approx. 3 seconds to Activate/Deactivate the Delay function
(automatic switching off of the Motor, the Fans and the Lighting with a 30' delay).
Cannot be enabled when Intensive or 24h are on.
T2 Turns the Motor on at speed two.
Press and hold the button for approximately 5 seconds, with all the loads turned off (Motor and
Lights), to turn the Activated Charcoal Filter alarm on. The relevant LED flashes twice to confirm.
To turn the alarm off, press the button again and hold for at least 5 seconds. The relevant
LED flashes once.
T3
Turns the Motor on at speed three.
Press and hold the button for approximately 3 seconds, with all the loads turned off (Motor
and Lights), to perform a reset. The LED S1 flashes three times.
T4 Turns the Motor on at INTENSIVE Speed.
This speed is timed to run for 6 minutes. At the end of this time, the system returns automatically
to the speed that was set before. If it is activated with the motor turned off, it will switch to
OFF at the end of the time.
Press and hold for 5 seconds to enable the remote control, indicated by the LED flashing twice.
Press and hold for 5 seconds to disable the remote control, indicated by the LED flashing
just once.
S1
Signals the Metal Grease Filter saturation alarm, indicating that it is necessary to wash the
filters. The alarm is triggered after the Hood has been in operation for 100 working hours.
When this is activated, it signals the Activated Charcoal Filter saturation alarm, indicating that the
filter must be changed; the Metal Grease Filters must also be washed. The Activated Charcoal
Filter saturation alarm comes into operation after the Hood has been working for 200 hours.
Lighting
• For replacement contact tech-
nical support ("To purchase
contact technical support").
10
All manuals and user guides at all-guides.com
T1 T2 T3
S1
T4
Led
-
Fixed.
Flashing.
Fixed.
-
Fixed.
-
Fixed.
-
Fixed.
Flashing.