Test Procedure - TECshow MINI HIVE-10 Manual De Usuario

DMX Mode selection
• Press MENU until it shows Users mode then just
press ENTER.
• Choose Channel mode by pressing UP or DOWN:
25 CH, 55CH.

Test Procedure

• Press MENU until it shows Test and then press
ENTER.
• Press UP or DOWN to choose All Pan & Tilt and
LED. When selecting All it is testing the motor and
LED. When selecting Pan & Tilt to test the motor
choose LED; it is only LED operated.
Adaptive function setting
• Press MENU until it shows Set and then just press
ENTER.
• Press UP, DOWN to choose Disp.setting, Pan Tilt.
• When selecting Disp.setting press ENTER, press
UP or DOWN to choose Shut off time, Flip display, Key
lock, or Disp flash. If selecting Shut off time press
ENTER operate UP or DOWN it can be set LCD backlight
close from 2-60 mins.
• When selecting Key lock press ENTER and oper-
ate UP or DOWN. Enter Option ON/OFF and select option
All manuals and user guides at all-guides.com
ON. When the backlight shuts off, the button key is locked,
it means the operation is invalid at this time. It must be
entered Up, Down, Down, then press ENTER to confirm
the unlock. When selecting Disp flash, press ENTER, oper-
ate UP or DOWN, it can be choosed ON/OFF, choose ON,
the screen's backlight begin to blink when the equipment
received the DMX signal; that means it has received the
DMX signal. The screen's backlight closed when there is no
signal. When selecting Pan or Tilt, press ENTER, operate
UP or DOWN. Choose Normal or Reverse to set the for-
ward and reverse operation.
P. 9
MINI HIVE 10
ENGLISH VERSION