Thulos TH-PA2200 Manual De Instrucciones página 7

USE OF THE GRILL PLATE.
- Place the roasting pan on a flat and stable surface.
- Do not place it on surfaces that can be damaged by heat.
- Make sure that the temperature control is in the 'OFF' position and insert it into the iron.
- Connect to the electric current making sure that the voltage is correct.
- Check that the plug has a ground connection.
- Prepare the food to cook before turning on the grill plate.
- Select the desired temperature in the temperature control.
- The temperature light will turn on and when it is turned off it will be ready to cook.
- From this moment you have to throw the food to cook them.
- Never leave the iron hot and plugged in without food as it may be damaged.
- During cooking, the temperature light is continuously switched on and off to maintain the
cooking temperature selected.
- Always use wooden utensils to move the food on the grill plate.
- Never use sharp utensils as this may damage the coating of the grill plate.
- Never cut food on the griddle.
- When the cooking is finished, set the temperature control to "OFF" and
unplug from the electric current, never leave it on without food.
CLEANING AFTER YOUR USE.
- Unplug the appliance from the mains and allow the unit to cool completely.
- Remove the temperature control of the device.
- Clean the surface of the iron with a damp cloth. Do not use water for cleaning.
- You can moisten the cloth in soapy water with neutral soap.
- Never use soaps or abrasive cleaning products.
- Do not use scouring pads or sharp objects as they may damage the nonstick coating.
- Never pour cold water on the iron while the surface is hot, it could be damaged
the coating of the iron as well as causing splashes of hot water.
- Remove and empty the grease drawer after each use and wash it in warm water with soap.
SPECIFICATIONS.
- Power Input: 220-240V / 50Hz
- Power: 1800 - 2200W.
- Measure: 65 x 30 cm.
- Adjustable thermostat.
- Granite Coating.
ATTENTION:
This article and / or manual may be subject to changes in specifications,
features and / or use without prior notification to the user, in order to continue improving and
developing its technology.
7