TaoTronics TT-SK021 Guia Del Usuario página 5

Note:
1. The LED indicator will keep ashing red and a beep sound when the
battery level is low.
2. Make sure the battery is fully charged before putting the speaker away
for storage.
3. Charge the speaker at least once every 3 months when not using for a
long time.
Pairing
1. When the unit is off, press and hold the Multifunction Button for 5 seconds
to enter pairing mode. The LED indicator will alternatively ash between
blue and red
2. Turn on the Bluetooth function on your phone and search for nearby
devices, nd "TaoTronics TT-SK021" in the search results, tap on the name to
connect. Once connected, a beep will sound. The LED indicator will enter
automatic color carousel mode in which seven different colors will cycle
through.
Note:
If the speaker cannot connect with your device, clear the pairing history by
pressing and holding the Volume + / - Buttons at the same time for 5
seconds. Then press the Multifunction Button to restart the speaker to pair
again.
Charging
Volume + / - Press the Volume + / - Button
Previous / Next Track Press and hold the Volume + / - Button
Play / Pause Press the Multifunction Button once
Answer / Hang up
Press the Multifunction Button once
Phone Calls
Press and hold the Multifunction Button for one
Refuse Phone Call
second
Redial Press the Multifunction Button twice
Press and hold the Volume + / - Buttons at the
Repair
same time for 3 seconds
03/04