Installation - Electrolux EWN 12791 W Manual Del Usuario

Installation

Unpacking
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
1. After removing all the packaging,
carefully lay machine on it's back to
remove the polystyrene base from the
bottom.
HEC0008
2. Remove the power supply cable and
the draining hose from the hose
holders on the rear of the appliance.
HEC0001
3. With a suitable spanner unscrew and
remove the central rear bolt
All manuals and user guides at all-guides.com
HEC00022
4. Unscrew and remove the two large
HEC0003S
5. Remove the bracket
D
HEC0011S
A .
HEC0023
installation electrolux 39
rear bolts B and the six smaller bolts
.
C
B
B
C
the six smaller bolts C and
the relevant plastic spacer E.
E
C
C
A
GB
C
and tighten up
D
slide out