Original instructions: English
Translation of the original instructions:
Other languages
Read "the Safety Instructions" booklet
and the following before using.
I. ADDITIONAL
SAFETY RULES
1) Wear ear protectors when using the tool
for extended periods.
2) Be aware that this tool is always in an
operating condition, since it does not have
to be plugged into an electrical outlet.
3) When screwing or driving into walls,
floors, etc., "live" electrical wires may be
encountered. DO NOT TOUCH THE HEX
QUICK CHUCK OR ANY FRONT METAL
PARTS OF THE TOOL! Hold the tool only
by the plastic handle to prevent electric
shock in case you screw or drive into a
"live" wire.
4) Do NOT operate the Forward/Reverse
lever when the main switch is on. The
battery will discharge rapidly and damage
to the unit may occur.
5) During charging, the charger may become
slightly warm. This is normal.
Do NOT charge the battery for a long
period.
6) When storing or carrying the tool, set
the Forward/Reverse lever to the center
position (switch lock).
7) Do not strain the tool by holding the speed
control trigger halfway (speed control
mode) so that the motor stops.
EY7552_EU.indb 5
Symbol
V
n
0
Revolutions or reciprocations
... min
-1
Ah
- 5 -
Meaning
Volts
Direct current
No load speed
per minutes
Electrical capacity of battery
pack
Read the operating
instructions before use.
For indoor use only.
2013-10-30 14:07:15