REFLECTS 51759 Manual Del Usuario página 15

2) Assemble the pieces for the upper platform and mast.
7 dowels - line them up!
- 1 at 8.5 cm
- 2 at 10.5 cm
- 1 at 11.5 cm
- 1 at 12 cm
- 2 at 13 cm
3) Assemble mast support
Let glue dry!
4) Insert canopy support dowels.
Start at the
top, and insert
- smallest to
longest - as
you turn the
mast counter
clockwise.
11,5 mm
51759 AL.indd 16
Screw eyes into the 4 star-
ter holes on one side of the
outer ring.
Insert support Gently push mast
into holes in through the collar
outer ring. so the bottom of
the mast is 4 cm
below the collar.
No glue, this is
pressure fit
for now!
8,5 mm
Push the dowel
right to the edge.
No need for glue!
(if they are loose,
you can add a
small drop!)
12 mm
Glue the collar and mast supports in the
grooves.
8
10,5 mm
16
17
Nice!
4 cm
We removed the round base
in the drawings below to
remove clutter!
10,5 mm
13 mm
25.06.2013 14:07:18
13 mm