MINISTRY OF SOUND Audio M Guia De Inicio Rapido página 2

Audio M
EN
®
Bluetooth Connected Speaker
1 Power Button
Press and hold (2 seconds) to turn unit on/off.
2 Bluetooth
On your device, turn on Bluetooth and scan
for devices. Select Audio M from the list.
To turn on Bluetooth press the connect
button 2 . The status LED 6 will blink blue
on/off. Once connected the status LED will be
blue.
Note: After 1st use your device will
automatically reconnect to the speaker.
To clear paired devices from the memory,
double click both the power and Bluetooth
buttons.
3 NFC
Touch here to connect your NFC Device.
4 Connecting two Audio M speakers
If you have two Audio M speakers you are
able to connect them wirelessly and stream
your music to both, turning them into left and
right stereo speakers.
Connect to your 1st speaker (Left) to your
Bluetooth device. Long press the connect
button (2-3 seconds) on your 1st speaker
until you see the LED blink pink quickly, this
confi rms the speaker is available to pair with
the second speaker.
All manuals and user guides at all-guides.com
3 5
6
2
1
7
4
On your 2nd speaker (Right), long press the connect button (2-3 seconds) until the status LED
shows fast blink pink and the units will connect in stereo. The status LED will turn solid pink to
confi rm stereo.
Note: The fi rst speaker temporarily disconnects from the device and then automatically
reconnects - please press play on your device to restart music.
5 Touch Pad
Use the touch pad to play, skip and change volume of music. Position your fi nger on the centre
of the Ministry of Sound logo and move your fi nger as shown in the images.
Make a circular clockwise motion on the
touch pad to INCREASE the volume.
5
Make a circular anticlockwise motion on the
touch pad to DECREASE the volume