Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Contents / Inhalt / Contenu / Contenido
Contents
Page 3-14
WIKA Global
Page 52
Inhalt
Seite 15-27
WIKA Global
Seite 52
2 WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio LS/LH-10
GB
D
GB
Contenu
Page 28-39
WIKA Global
D
Contenido
Paginás 40-51
E
F
1. Important details for your information / 2. A quick overview for you
1. Important details for your information
F
Read these operating instructions before installing and starting the pressure transmitter. Keep
the operating instructions in a place that is accessible to all users at any time.
The following installation and operating instructions have been compiled by us with great care
but it is not feasible to take all possible applications into consideration. These installation and
operation instructions should meet the needs of most pressure measurement applications. If
questions remain regarding a specific application, you can obtain further information:
Via our Internet address www.wika.de / www.wika.com
„
The product data sheet is designated as PE 81.09
„
Contact WIKA for additional technical support (+49) 9372 / 132-295
„
With special model number, e.g. LS-10000 or LH-10000, please note specifications in the
delivery note.
If the serial number on the product label gets illegible (e.g. by mechanical damage or repain-
ting), the retraceability of the instrument is not possible any more.
Page 52
WIKA pressure transmitters are carefully designed and manufactured using state-of-the-art
technology. Every component undergoes strict quality and environmental inspection before
E
assembly and each instrument is fully tested prior to shipment. Our environmental manage-
ment system is certified to DIN EN ISO 14001.
Use of the product in accordance with the intended use LS-10, LH-10:
Use the pressure transmitter to transform the pressure into an electrical signal.
Knowledge required: Install and start the pressure transmitter only if you are familiar with the
relevant regulations and directives of your country and if you have the qualification required.
You have to be acquainted with the rules and regulations on measurement and control tech-
nology and electric circuits, since this pressure transmitter is „electrical equipment" as defined
by EN 50178. Depending on the operating conditions of your application you have to have the
corresponding knowledge, e.g. of aggressive media.
2. A quick overview for you
If you want to get a quick overview, read Chapters 3, 5, 7 and 10. There you will get some
Paginás 52
short safety instructions and important information on your product and its starting. Read
these chapters in any case.
WIKA Operating instructions/Betriebsanleitung/Mode d'emploi/Instrucciones de servicio LS/LH-10
GB
3
Publicidad
Tabla de contenido
