Technical Data - Skil 2436 Manual Original

Cordless screwdriver
INTRODUCTION
• This tool with left/right rotation is
intended for screwdriving in wood
• This tool is not intended for
professional use
• Read and save this instruction manual
3

TECHNICAL DATA

Max. torque for hard screwdriving
application according to ISO 5393 : 7 Nm
TOOL ELEMENTS
A On/off switch
B Switch for changing direction of
rotation
C Magnetic bitholder
SAFETY
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING Read all safety
warnings, instructions, illustrations
and specifications provided with this
power tool. Failure to follow all
instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference. The term "power tool"
in the warnings refers to your
mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite
accidents.
b) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
All manuals and user guides at all-guides.com
2) ELECTRICAL SAFETY
a) Power tool plugs must match the
2436
b) Avoid body contact with earthed or
1
c) Do not expose power tools to rain
2
d) Do not abuse the cord. Never use
e) When operating a power tool
f) If operating a power tool in a damp
3) PERSONAL SAFETY
a) Stay alert, watch what you are
b) Use personal protective
c) Prevent unintentional starting.
8
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with earthed (grounded)
power tools. Unmodified plugs and
matching outlets will reduce risk of
electric shock.
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
or wet conditions. Water entering a
power tool will increase the risk of
electric shock.
the cord for carrying, pulling or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges or moving parts. Damaged or
entangled cords increase the risk of
electric shock.
outdoors, use an extension cord
suitable for outdoor use. Use of a
cord suitable for outdoor use reduces
the risk of electric shock.
location is unavoidable, use a
residual current device (RCD)
protected supply. Use of an RCD
reduces the risk of electric shock.
doing and use common sense
when operating a power tool. Do
not use a power tool while you are
tired or under the influence of
drugs, alcohol or medication. A
moment of inattention while operating
power tools may result in serious
personal injury.
equipment. Always wear eye
protection. Protective equipment
such as dust mask, non-skid safety
shoes, hard hat, or hearing protection
used for appropriate conditions will
reduce personal injuries.
Ensure the switch is in the
off-position before connecting to