Makita XRM06X Manual Del Usuario página 13

Pairing your Bluetooth
1. Press the Source button
function. "BT READY" will be shown on the display and
"READY" will flash with every 2 seconds interval.
®
2. Activate Bluetooth on your device according to the
device's user manual to allow the paring procedure.
3. Press and release the Pair button
will be shown on the display and it will flash with 1
second interval. You can start the search of your radio
®
on your Bluetooth device. Once the name of your
radio is appeared on your Bluetooth
®
item in your Bluetooth list. With some old type mobiles
(versions earlier than BT 2.1 Bluetooth
may need to input the pass code "0000".
®
4. Your Bluetooth device will be linked with the radio.
5. Once connected, "BLUETOOTH" will remain on the
display and the backlight will be dim-out in 10 seconds.
You can now play the music in your Bluetooth
device via your radio.
®
Playing Bluetooth device which has
already paired
1. Press the Source button
function. "BT READY" will be shown on the display and
"READY" will flash with every 2 seconds interval.
2. Search and link the radio on your Bluetooth
Some device may link with the radio automatically.
You can now play the music in your Bluetooth
device via your radio.
Note:
The radio can pair with 8 Bluetooth
®
When you pair Bluetooth devices more than this
number, pairing history will be overwritten from the
oldest pairing history.
®
If there are 2 Bluetooth devices searching for your
radio, it will show its availability on both devices.
®
If your Bluetooth device is temporarily disconnected to
your radio, then you need to manually reconnect your
device again to the radio.
If the name of your radio is appeared on your
®
device list but your device cannot connect
Bluetooth
with it, please delete the item name of your radio from
your list and pair the device with your radio again
following the steps described previously.
The effective operation range between the radio and
the paired device is approximately 10 meters (30 feet).
Any obstacle between the radio and the device can
reduce the operational range.
Disconnecting your Bluetooth
Press and hold the Pair button
disconnect with your Bluetooth
will disappear from the display indicating deactivation of
®
Bluetooth .
®
device
®
to select Bluetooth
, then "BT PAIR"
®
device, press the
®
device), you
®
-enabled
®
to select Bluetooth
®
device.
®
-enabled
®
devices at most.
®
device
for 2-3 seconds to
®
device. "BLUETOOTH"
13 ENGLISH
Charging with USB power supply port
(Fig. 10)
There is the USB port at the front side of the radio. You
can charge USB device trough the USB port.
1. Connect the USB device, such as iPod, MP3, or CD
player, with USB cable available in the market.
2. Press the Power button
3. No matter if the radio is AC powered or battery
powered, the radio can charge the USB device when
the radio is switched on and in FM radio mode, or
BT mode, or AUX mode, which is appeared when an
external audio source is connected.
Note:
You cannot charge USB devices during AM mode
because radio signal reception becomes extremely poor
when charging USB device.
The maximum volume of the output power speaker will
decrease when your USB is charging.
The USB socket can provide max 1A 5V of electrical
current.
Important:
Before connecting USB device to the charger, always
backup your data of USB device. Otherwise your data
may lose by any possibility.
The charger may not supply power to some USB
devices.
When not using or after charging, remove the USB
cable and close the cover.
Do not connect power source to USB port. Otherwise
there is risk of fire. The USB port is only intended for
charging lower voltage device. Always place the cover
onto the USB port when not charging the lower voltage
device.
Do not insert a nail, wire, etc. into USB power supply
port. Otherwise a circuit short may cause smoke and
fire.
Do not connect this USB socket with your PC USB port,
as it is highly possible that it may cause breakdown of
the units.
MAINTENANCE
CAUTION:
Never use gasoline, benzine, thinner, alcohol or the like.
Discoloration, deformation or cracks may result.
to switch on your radio.