Firmware Upgrade - Tripp-Lite B003-HC2-DOCK1 Manual Del Propietário

Firmware Upgrade

1
2
3
4
5
-05-248-933CAE.indb 12 -05-248-933CAE.indb 12
Connect one end of a USB-C cable to your computer and
the other end to Port 1 on the docking station.
Note: Do not connect a source to Port 2.
Connect the Remote Port Selector cable to the unit.
Press and hold the remote button, then power on the
B003-HC2-DOCK1. The LED will blink and unit will enter the
firmware upgrade mode.
Run the Upgrade.bat file and follow the instructions.
After a successful firmware upgrade, disconnect the power
source to the B003-HC2-DOCK1 to exit the firmware
upgrade mode.
12
11/16/2020 5:32:35 P 11/16/2020 5:32:35 P