How to Use Your Range
HOW TO ADJUST THE FLAMES AND OVEN PILOT
If the range has yellow flames, it may
require adjustment to the air shutters:
How to adjust the air for surface burners:
1
Remove the
knobs.
NOTE: Because of different altitudes above sea level and variations
in the supply of gas, you may need to adjust the main air intake
to the burners. This will result in a better air-gas mixture and thus
a better operation.
The models with thermostat have a pilot in the oven burner,
to adjust it:
1.- Without the manifold panel, locate the adjustment screw on
the thermostat, see the illustration on the right side.
2.- Remove the oven tray (see page 12) and turn the knob
approximately 30° until you feel a small stop,
turn the oven pilot on with a match or a lighter.
Pilot Position
3.- With a flat and thin screwdriver turn the adjustment screw
until you get a flame approximately 3/8" tall.
4.- Replace the manifold panel, screws and knobs.
All manuals and user guides at all-guides.com
2
Unscrew the screws
of front and below the
manifold panel and
remove it.
NOTE: Do not obstruct the gas
exhaust of the oven or broiler
3
Adjust the air shutters
individually. Light the
burner, then push or pull
the air shutter until you
get a blue flame.
ADJUSTABLE FLAT SCREW
FOR THE OVEN PILOT
7