Using the appliance
You can use the appliance to trim, edge or shave facial hair (beard,
moustache and sideburns). Shave for a smooth result, trim to obtain
a certain length and edge to create perfect edges and sharp lines.
This appliance is not intended for shaving, edging or trimming hairs on
lower body parts or scalp hair.
Take your time when you first start to use the appliance. You have to
acquire practice with the appliance.
Note: This appliance can only be used without cord.
Switching the appliance on and off
1
To switch on the appliance, press the on/off button once.
2
To switch off the appliance, press the on/off button once.
Shaving
Before you use the appliance, always check the blade for damage or wear.
If the blade is damaged or worn, do not use the appliance, as injury may
occur. Replace a damaged blade before you use the appliance
(see chapter 'Replacement').
Shaving tips and tricks
-
Make sure that the blade is in full contact with the skin by placing it flat
on the skin.
-
For the best result, move the appliance against the grain.
-
Make long strokes while you press lightly.
-
You can use the appliance dry or wet with gel or foam, even in the
shower.
-
Shaving a clean beard and face gives the best results.
1
Switch on the appliance.
2
Place the blade on the skin and move the appliance up or against the
grain in long strokes while you press it lightly.
ENGLISH
7