Control Panel And Features - Kenmore 68102 Manual De Uso Y Cuidado

CYCLE STATUS LIGHTS
1
Lights indicate the progress of the drying cycles.
Check Lint Screen Light
The Check Lint Screen indicator light will come on if a
blocked vent or low airflow issue is detected. For more
information on maintaining good airflow, see "Check Your
Vent System for Good Airflow".
DRYER CYCLE KNOB
2
Use your dryer cycle knob to select available cycles on your
dryer. Turn the knob to select a cycle for your laundry load.
See "Cycle Guide" for detailed descriptions of cycles.
Auto Dry
Automatic cycles give the best drying in the shortest time.
Drying time will vary based on fabric type, load size, and
dryness setting.
Timed Dry
Will run the dryer for the specified time on the control.
ESTIMATED TIME REMAINING
3
When you select a cycle, its default settings will light up and
the Estimated Time Remaining (for Auto Dry cycles) or actual
time remaining (for Timed Dry cycles) will be displayed.
CYCLE OPTIONS
4
Drum Light
Select Drum Light to turn on the light inside the dryer
drum. When pressed during a cycle or not running, the
Drum Light turns on and will remain on until DRUM LIGHT
is pressed again, or the door is opened and closed, or the
door is left open for 5 minutes.
Press DRUM LIGHT at any time to turn the drum light ON
or OFF.
Wrinkle Guard
™
When you are unable to remove a load of clothes from the
dryer as soon as it stops, wrinkles can form. The WRINKLE
GUARD™ 150 feature periodically tumbles, rearranges,
and fluffs the load to help keep wrinkles from forming.
Get 150 minutes of heat-free, periodic tumbling at the
■
end of a cycle. Press the WRINKLE Guard™ 150 button
to turn ON or OFF at any time before the cycle has
ended.

CONTROL PANEL AND FEATURES

1
8
Not all features and options are available on all models.
150 Feature
2
Appearance may vary.
Damp Signal
When selected, a signal will sound during the drying cycle
when the load is damp but not completely dry. This will
allow you to take clothes out of the load that do not need
to dry completely. This option is available on Auto Dry
cycles only. It is a default option for the Bulky cycle.
CYCLE SIGNAL
5
The Cycle Signal produces an audible sound when the drying
cycle is finished. Promptly removing clothes at the end of the
cycle reduces wrinkling.
Press CYCLE SIGNAL until the desired setting (High, Low, or
Off) is selected.
NOTE: When the Wrinkle Guard™ setting is selected and
the Cycle Signal is on, the tone will sound every 15 minutes
until the clothes are removed, or the Wrinkle Guard™ setting
ends.
CYCLE MODIFIERS
6
Dry Level
You may adjust the Dry level on Auto Dry cycle only, if
desired.
NOTE: The Dry Level modifier is for use with Auto Dry
cycles only. Not available on the Sanitize cycle.
Dry Temp
When using Timed Dry cycle only, you may select a dry
temperature based on the type of load you are drying.
Use the warmest setting safe for the garments in the load.
Follow garment label instructions.
NOTE: The Air Only Temp feature is not available on the
Auto Dry Cycles.
START/PAUSE BUTTON
7
Press START/PAUSE to start a cycle, or press START/PAUSE
once while a cycle is in process to pause the cycle.
POWER BUTTON
8
Press POWER to turn the dryer on and off.
3
7 6
4
5
5