Stop; Maintenance; Lubrication; Water Suction Filter Checking - LAVOR Pro INDEPENDENT 1900 Manual Del Usuario

II. STOP
OFF
EN
OFF
1. Push the engine switch to the OFF position (Fig. 14).
ON
Engine switch
fi g. 14
Fuel cock
3. Set the fuel cock to the OFF position (Fig. 15).
CAUTION: Turn off the machine when fi nished
working.
CAUTION: When the machine is switched off , OFF
always discharge the pressure hose, opening the gun.
fi g. 15
CAUTION: In an emergency, push the engine switch to "OFF" to stall the engine.

MAINTENANCE

CAUTION: Before to carry out any kind of maintenance to the washer machine, run the
pressure down, take the water connection out.
I. LUBRICATION
Motor: see "owner's manual - general gasoline engine".
High-pressure water pump: we recommend GEAR SYNTHETIC
OIL ISO 150 - Oil capacity 65 gr.
II. WATER SUCTION FILTER CHECKING
Check periodically in order to avoid deposits clogging it (fi g.
16).
fi g. 16
III. LONG STORAGE PERIOD
If you forsee/expect to keep the machine in environments
where there is danger of ice/frost or if you don't use it for more than 3 months, we suggest to
get the machine to intake an antifreeze before putting it away (similar to that used for cars).
Furthermore, at start-up, small leaks may occur from the pump; these will disappear after a few
hours in operation. Up to 10 drops a minute are acceptable; in case of larger leaks contact an
Authorised Service Centre.
23