Turning On/Off The Speakerphone; Pairing - aqprox APPBT01 Guía De Usuario

All manuals and user guides at all-guides.com
LED will flash on for 3 seconds.
Turning Off: Speakerphone is under standby mode:
Press and hold the"MFB"button for 3 seconds until you hear a long beep. The red
LED will flash on for 3 seconds.
IMPORTANT: Press the "MFB" button again each time you turn on the speakerphone
to reactive the paring so that the connection in between the speakerphone and paired
mobile phone is resumed. For pairing, please refer to procedures under "Pairing".

8. Pairing

Prior to using the spekerphone for the first time, you must pair it with a Bluetoothe-
nabled mobile phone. The following steps describe pairing instruction for a typical
Bluetooth-enabled mobile phone.
(1) Place the speakerphone and mobile phone no more than 1 meter apart.
(2) Ensure the speakerphone is under OFF mode.
(3) Press and hold the "MFB" button for 6 seconds until you hear a long beep. The
LED will flash red and blue alternatively. It is now ready for pairing.
(4) Activate your mobile phone's Bluetooth function and search for accessible Blue-
tooth devices by referring to your mobile phone user guide for details.
(5) Select "BT Speaker"from the list.
(6) Enter the pre-programmed code 0000 and press OK to pair the speakerphone and
the phone. When pairing is completed, you may hear a long beep and the blue LED
will flash on 3 times. Now the speakerphone is under standby mode with blue LED
19