Operating With A Somfy Io Sensor; Feedback; Additional Settings; Favourite Position (My) - SOMFY Pergola io Manual Para El Instalador

Ocultar thumbs Ver también para Pergola io:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 52
Pergola io

6.2. Operating with a Somfy io sensor

Refer to the corresponding guide.

6.3. Feedback

After each order, the Pergola io sends a message. This information is processed by the io two-way
control points.

7. ADDITIONAL SETTINGS

7.1. Favourite position (my)

7.1.1 Programming or modifying the favourite position (my)
The procedure to follow for programming or modifying the
favourite position (my) is identical.
1) Put the awning in the desired favourite position (my).
2) Press the "my" button until the awning moves briefly: the
favourite position (my) has been programmed.
7.1.2. Deleting the favourite position (my)
1) Press the "my" button: the awning will start to move, and
stop in the favourite position (my).
2) Press the "my" button again until the awning moves
briefly: the favourite position (my) has been deleted.
7.2. Adding/Deleting Somfy io control points
and io sensors
Refer to the corresponding guide.

7.3. Modifying end limits

Modification of end limits depends on the type of awning.
7.3.1. Modification for tensioned Pergola awnings
For tensioned Pergola awnings, the upper end limit can be modified in semi-automatic mode.
Readjusting the upper end limit in semi-automatic mode
1) Position the awning at the upper end limit.
2) Press the Up and Down buttons simultaneously until the
awning moves briefly: the motor is in setting mode.
3) Adjust the awning's top position using the Up or Down
buttons.
4) Press the "my" button until the awning moves briefly: the
new upper end limit has been programmed.
7.3.2. Modification for untensioned Pergola awnings
The upper and lower end limits can be modified for untensioned Pergola awnings.
upper end limit
1) Position the awning at the upper end limit.
2) Press the Up and Down buttons simultaneously until the
awning moves briefly: the motor is in setting mode.
3) Adjust the awning's top position using the Up or Down
buttons.
4) Press the "my" button until the awning moves briefly: the
new upper end limit has been programmed.
48
Copyright © 2010-2017 Somfy Activités SA, Société Anonyme. All rights reserved.
1
2
or
my
5 s
1
2
my
5 s
1
2
3
4
or
Readjusting the
1
2
3
4
or
5 s
2 s
5 s
2 s

Publicidad

Tabla de contenido
loading

Tabla de contenido