Attaching The Stand For Vertical Placement - Toshiba PX1265E-1G16 Guia Del Usuario

All manuals and user guides at all-guides.com

Attaching the stand for vertical placement

1. Remove the two small plugs located inside the recessed area on
one of the long sides of the Drive case to expose the screw holes
underneath.
2. Seat the top of the stand inside
the long recessed area on the side
of the Drive with the screw holes.
3. Using the supplied screws,
mount the stand to the Drive case
using a small Phillips screwdriver.
Make sure the stand is firmly
attached, but do not overtighten
the screws.
24