CREATE THE BUBBLES
1. Fill the Carbonating Bottle with cold water up to the fill line.
WARNING! Do not carbonate anything other than water. Other
liquids can contaminate and clog internal parts, potentially
resulting in excessive pressure, bottle failure during
carbonation and serious injury. Never carbonate after flavoring
has been added.
2. To insert the Carbonating Bottle, make sure that the Carbonating
Bottle rest is angled forward. Please make sure you do not pull the
carbonating tube. WARNING! Never use a Sparkling Water Maker
with a broken carbonating tube. This can cause excessive
pressure, bottle failure and serious injury. Insert the Carbonating
Bottle neck into the Snap-Lock. Push the Carbonating Bottle up and
back. The Snap-Lock will hold the Carbonating Bottle.
3. To carbonate, press the carbonating button in short 1 second
presses; 3 presses for standard carbonation and 5 presses for strong
carbonation.
4. When the desired level of carbonation is achieved, gently pull the
Carbonating Bottle towards you until it reaches its fully forward
position. This will release the pressure in the Carbonating Bottle and
allow the Carbonating Bottle to be released from the Snap-Lock.
WARNING! Do not remove Carbonating Bottle until after hearing
the sound of excess CO2 being released. Never force the
Carbonating Bottle out of the Snap-Lock. Always allow the Sparkling
Water Maker to release the Carbonating Bottle. If the Carbonating
Bottle does not immediately release from the Snap-Lock wait a few
moments. If it still does not release, then push the Carbonating Bottle
back into the vertical position and gently pull it towards you again.
Attempting to remove the Carbonating Bottle while it is still
pressurized can cause uncontrolled ejection of the Carbonating
Bottle and may result in serious injury.
CARE
SPARKLING WATER MAKER CARE
• Never use abrasive cleaners or sharp tools to clean. If needed, use a mild liquid dish soap and a soft
damp cloth to gently clean.
• Wipe spills to keep base dry.
• Do not place in water or wash in a dishwasher, doing so will seriously damage your Sparkling Water
Maker.
CARBONATING BOTTLE CARE
• For Carbonating Bottles which are not "dishwasher safe", to clean, rinse Carbonating Bottles with cold or
lukewarm water. WARNING! Do not expose to heat above 50°C. Never wash or rinse in hot water.
Do not wash in dishwasher.
• For "dishwasher safe" Carbonating Bottles, to clean, either wash in dishwasher or rinse Carbonating
Bottles with cold or lukewarm water. WARNING! Do not expose to heat above 70°C.
14
1
2
Note: when inserted correctly, there is a small
gap between the bottom of the Carbonating
Bottle and the base. Do not carbonate if the
Carbonating Bottle is resting on the base, or
water will splash out.
3
Note: You may see small pieces of ice appear
in the water during carbonation of very cold
water. Any ice created will simply melt.
4