Publicidad
Idiomas disponibles
Idiomas disponibles
EN
approved must not be used.
18. For chassis equipped with mounting holes for the car seat - all connectors that the
manufacturer or distributor has not approved must not be used. The manufacturer
is not liable for the consequences of installing other car seats onto the chassis that
do not have their approval. List of car seats with suitable approvals is posted on the
manufacturer's website.
19. Adaptors for the car seat that the manufacturer or distributor has not approved
must not be used.
WARNING: Check that the car seat attachment devices are correctly engaged
before use.
20. Do not use the combination of the car seat and chassis as a place for the child to
sleep for long periods of time. If your child wants to sleep, always use the carrycot
or cot bed. The pram is used as a means of transport, do not rock the product. Mo-
ving the pram forward and backwards on short distances the front wheels should
be locked on to the fixed position. Technological looseness of the spinning mecha-
nism may cause a change in direction which does not prove product defectiveness.
21. The manufacturer recommends fitting the car seat in the opposite direction to the
direction of travel (parent facing), it makes it easier to observe the child in the car
seat.
22. For pram designed from birth upwards it is recommended that the child lays in flat
position at all times.
23. For carrying cots equipped with strap handles always make sure that the carry
handles are outside of the carrycot when in use. The carrycot is fitted with a top
central carrying handle. Before lifting the carrycot ensure the hood is locked in the
upright position and that the lock is fixed in place and that there is no damage to
the mechanism. When the hood is in the extended position you must not attempt
to lift the carrycot up.
24. For any warranty and post-warranty repairs only use the parts supplied or recom-
mended by the relevant manufacturer or distributor. The pram should not be used
in any sort of defect has been noticed or any of the elements have been damaged.
25. The hood of the seat unit has been designed using flexible strips of steel, which
under the influence of pressure can be deformed. This may result in decreased
spacing between the internal metal bars and other parts of the system and lead to
damage such as causing the fabric to tear. ln, the case of deformation you must
make a correction by gently squeezing, stretching the internal metal bars.
26. ln the case of travel systems fitted with a reversible seat unit, it is not allowed to
change its position while baby is in it.
27. After unfolding the chassis, check whether the front and rear wheels are fitted
properly by trying to detach them from the chassis without pressing the button
that unlocks the locking mechanism.
28. After folding the chassis, check whether the safety mechanism (safety clip) that
ensures the chassis does not unfold by itself is working/fastened properly. If the
safety clip is not fastened properly, it needs to be adjusted manually.
29. While folding and unfolding the chassis, and during assembling stage, keep your
hands at a safe distance from moving parts to avoid injuries.
30. 'D' rings are provided for the attachment of an additional harness. These are loca-
ted on the existing harness close to where it is attached to the seat frame. 'D' rings
are provided for fitting a separate harness if required. Replacement Harness can be
purchased directly from the distributor.
31. Operating the parking brake.
Press down on the pedal to engage the parking brake
Press down and release to disengage the parking brake.
WARNING: Never leave the vehicle without first fully engaging the parking brake.
32. All the zips/metal logos have an adhesive plastic wrapper. Remove plastic wrappers
from all zips/metal logos before use. Keep away from the baby.
33. Venicci Turisso Frame is fully compatible with Venicci Turisso CarSeat adapter.
Publicidad
