Airtemp B6Q10F2A Manual De Instalación Y Operación página 3

Tools Needed
p Screwdrivers
p Level
Window Requirements
1. Air conditioner is factory prepared for installation in standard double hung
window (air conditioner cannot be installed in other types of windows with-
out modification, consult with a qualified installation serviceman).
2. Install the air conditioner in a window where there will be enough clearance
around the cabinet to allow ample circulation of air through the unit.
3. All supporting parts should be secured to firm wood, masonry or metal.
Unit & Window Size
1. If your air conditioner cabinet is 20" wide, it will fit window openings 23
7/8" to 39" in width. Minimum opening height is 12 3/4" from bottom of
sash to sill. Removal of both filler panels permits installation in windows with
a minimum opening width of 20 1/4". This size unit requires one leveling
bracket (Fig. 3).
2. If your air conditioner cabinet is 23 3/4" wide, it will fit window openings 27
5/8" to 39" in width. Minimum opening height is 16" from bottom of sash to
sill. Removal of both filler panels permits installation in windows with a mini-
mum opening width of 24". This size unit requires two leveling brackets (Fig.
4).
Attach Filler Panels
1. Attach filler panels to the existing holes in the cabinet using the supplied
screws
(Fig. 5).
Installation in Normal Width Window
1. Open and mark center line of window. Depending on the size of your unit,
attach one leveling bracket on the center line of the window or one 8" to the
right and one 8" to the left of the center line. Brackets may be attached to
window sill in either direction for maximum support, depending on the depth
of the window sill.
2. Mark line 1 1/4" from edge of window sill and fasten leveling bracket with 1"
long wood screws at mark through larger holes in bracket (Fig. 6).
3. Screw leveling bolt in 3/8" threaded hole of leveling bracket and adjust so
bolt is 1/4" below top of window sill (Fig. 7).
4. Repeat steps 2 and 3 for second leveling bracket, if required.
All manuals and user guides at all-guides.com
p Ruler or
tape measure
p Pencil
On some models...
3
4
5
Top bar
Filler
panel
Screws
6
1" long
wood screw
1 1/4"
space
Sill
edge
Screw
Leveling bolt
7
Sill edge Screw
1 1/4"
space
3
INSTALLATION
WINDOW INSTALLATON
23 ⁄ " to 39"
7
8
12 3 ⁄ "
4
min.
27 5 ⁄ " to 39"
8
16"
min.
Bottom bar Cabinet
OUTSIDE VIEW
3/8" threaded hole
Leveling bracket
1/4"
SIDE VIEW