B
B
ODY
EASY INSTALLATION
INSTRUCTIONS
STEP 1
Remove your existing
shower head. To
remove, turn the
existing shower head
in a counterclockwise
direction.
STEP 4
In a clockwise
direction, screw fixed
unit onto the taped
portion of the diverter
and hand tighten.
ATTENTION:
WASHERS PRE-INSTALLED
IN HOSE ENDS
Washers must be inserted into both hose
ends for proper installation.
USING THE DIVERTER
To change the shower spray: Place
your index finger on one lever
and your thumb on the other
lever and rotate either clockwise
or counter clockwise (depending on
the current position) until you feel it
click into place.
AR
STEP 2
Remove any remnants
of old plumber's
tape and flush out
shower pipe for 5 to
10 seconds. Wrap
plumber's tape
clockwise 3 or 4 turns
around threaded end
of shower arm.
STEP 5
Clean area BodyBar
will be applied. Remove
covering from adhesive
strips – adhesive is
extremely powerful.
Place BodyBar in desired
location within shower.
Press and hold firmly in
place for 30 seconds.
WARNING:
ADHESIVE IS EXTREMELY STRONG
AND WILL STICK ON CONTACT
Oxygenics is not responsible for any injury or
damage resulting from improper installation,
use, or removal of the BodyBar.
STEP 3
Screw the diverter
clockwise onto the
taped portion of the
shower arm. Wrap
plumber's tape 3 turns
around threaded ends
of the diverter.
STEP 6
Attach hex nut end of
hose to diverter and
hand tighten. Attach
conical nut end of
hose to BodyBar and
tighten.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty, our
Customer Service team can be contacted by:
PHONE:
1-866-440-9257
775-420-5600
or
LIVE CHAT:
www.oxygenics.com
EMAIL:
support@oxygenics.com
ONLINE:
www.oxygenics.com/claims
Business hours:
Monday - Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST*
*Closed on all nationally observed holidays
For use with automatic
compensating valves
rated at 1.35 GPM
(5.11 L/min) or less.