Installing The Camcorder To The Marine Pack - Sony MPK-DVF5M Manual De Instrucciones

Installing the camcorder to the marine pack

1
Install the camcorder to the marine pack.
Connect the remote plug and the
microphone plug.
1 Connect the microphone plug to
the MIC jack (plug in power).
2 Connect the remote plug to the
LANC
2
Insert the camcorder until the
mounting shoe clicks into place.
3
Connect the monitor cord to the
jack of camera mounting shoe B.
4
Attach the front shell to the rear
shell. Hold both shells firmly and
fasten the 3 latches securely.
Take care not to pinch the
remote, microphone, and monitor
cords. If this happens water may
leak in.
For details on handling the O-ring,
see page 22.
jack.
The cords are placed in the plug
holders of the marine pack at the
factory. Pull the plugs out of the
holders when in use.
to the LANC jack
front shell
to the MIC jack
(plug in power)
GB
continued
13
-GB