Uline H-9538 Instrucciones De Montaje página 2

Figure 2
Left Leg
Figure 3
Figure 4
PAGE 2 OF 6
ASSEMBLY CONTINUED
Right Leg
Cross Brace
1-800-295-5510
uline.com
2. Attach legs to extension tab using one bolt, two
washers and one nut. Repeat for remaining three
extension tabs. (See Figure 2)
NOTE: Install all legs loosely, do not tighten legs
until cross brace is attached to legs.
3. Align hole on cross brace between holes on table
legs and attach using one bolt, two washers and
one nut. Repeat for remaining three holes on cross
brace. (See Figure 3)
4. Align hole on cross brace between holes on table
legs and attach using one bolt, two washers and
one nut. Repeat for remaining three holes on cross
brace. (See Figure 4)
1221 IH-9538