Bremont 247 TI-GMT Manual Del Usuario página 7

CROwN
Ensure that the crown is screwed in to prevent entry of water into the
mechanism.
SEA wATER
Wash with fresh water following exposure to saline water.
ShOCkS AND JOlTS
Avoid any heavy shocks to the watch.
MAGNETIC FIElDS
Avoid contact with electrical equipment and strong magnets such as speakers,
magnetic tablet case covers and radio alarm clocks.
TEMPERATuRE
Keeping the watch in contact with the wrist will help minimize any exposure
to extremes. Bremont recommend that you do not wear your watch near hot
water, for example in the shower, steam room or jacuzzi. Extreme changes in
temperature can cause moisture to permeate the seals and cause condensation
to form inside of the watch.
ChEMICAlS
Wash with warm fresh water if it is exposed to solvents etc. to avoid damage
to seals and watch straps.
SERvICING
Every part of your watch has been carefully chosen from the best selection of
materials available. In spite of this, a number of parts will always be subject to natural
wear. It is therefore important that these points of wear are always kept lubricated.
We recommend that you have a maintenance service carried out every 3 to 5 years.
Only a certified Bremont agent should carry out the servicing of a Bremont watch. To
find your nearest repair and service centre please contact Bremont Watch Servicing on:
+44 (0) 845 0940 690 or email customerservice@bremont.com