Publicidad
Idiomas disponibles
Idiomas disponibles
TIME, DATE AND DAY OF THE WEEK FUNCTIONS
E
B
Fig. 1
CHRONOGRAPH FUNCTIONS
H
I
Fig. 2
A
C
1 2
D
TIME, DATE AND DAY OF THE WEEK FUNCTIONS (fig. 1)
TIMEPIECE INDICATIONS:
A. Hours
B. Minutes
C. Seconds
D. Date
E. Day of the week
SETTING THE TIME
1. Pull the crown out to position 3.
The seconds hand (C) will stop.
3
Remember the date advances
at 12.00 midnight, not 12.00 noon.
2. Turn the crown until the hands
indicate the desired time.
3. Push the crown back in to position 1.
SETTING THE DATE (Quick mode)
1. Pull the crown out to position
(the watch will continue to operate).
2. Turn the crown towards you until
the desired date is displayed.
3. Push the crown back in to position 1.
Note: To avoid damaging the movement,
do not SET THE DATE between
9.00 p.m. and 3.00 a.m. when
the date mechanism is in action.
CHRONOGRAPH FUNCTIONS (fig. 2)
PUSHERS:
F. Chronograph start/stop
G. Zero reset
CHRONOGRAPH INDICATIONS:
H. Seconds counter
I. 30-minute counter
USING THE CHRONOGRAPH
F
F
1. Press pusher
the chronograph.
2. Press pusher
F
3. Read off results from the two
chronograph counters:
MINUTES (I) / SECONDS (H).
RESETTING THE COUNTERS TO ZERO
G
1. Press pusher
G
has stopped. The two chronograph
counters (H, I) will return to zero.
USING INTERVAL TIMING
1. Press pusher
F
the chronograph.
2. Press pusher
G
interval timing (timing continues).
SETTING THE DATE,
DAY OF THE WEEK AND TIME
1. Pull the crown out to position 3.
The seconds hand (C) will stop.
2. Turn the crown towards you
until yesterday's day of
the week appears (E).
MON = Monday
TUE = Tuesday
WED = Wednesday
THU = Thursday
FRI = Friday
SAT = Saturday
SUN = Sunday
3. Push the crown back in to position 2.
2
4. Turn the crown towards you until
yesterday's date appears (D).
5. Pull the crown back out to position 3.
6. Turn the crown towards you until
the correct date (D), day of
the week (E) and time appears.
7. Push the crown back in to position 1.
3. Press pusher
to enable the hands to make up
time lost during read-off.
4. Press pusher
the chronograph completely
and display final time.
REALIGNING THE CHRONOGRAPH HANDS
1. Pull the crown out to position 3.
to start
2. Press pushers
simultaneously for 2 seconds
again to stop timing.
to activate corrective mode.
3. The hand on the seconds
counter (H) will run around
the dial and return to zero
when this mode is activated.
4. Press pusher
once the chronograph
the seconds counter (H).
5. Press pusher
6. Press pusher
the 30-minute counter (I).
7. When the hands are correctly
to start
aligned, push the crown back
in to position 1.
to display
G
again
F
to stop
F
and
G
F
to adjust
G
to confirm.
F
again to adjust
Publicidad
