Victorinox RONDA 5030.D Guia Del Usuario página 3

SETTING THE TIME
D
F
C
Fig. 1
CHRONOGRAPH BASIC FUNCTIONS
H
J
G
Fig. 2
E
I II III
A
B
SETTING THE TIME (fig.1)
Timepiece indications:
C. Hours
D. Minutes
E. Seconds indicator
F. Date
1. Pull out the crown to position III.
The seconds indicator (E) will stop.
Remember the date advances at
12:00 midnight, not 12:00 noon.
2. Turn the crown to position hands at
the desired time.
3. Push the crown back to position
Note: In order to set the time to the
exact second, the crown must be pulled
out when the seconds indicator (E) is
in position «60». Once the hour and
minute hands have been set, the crown
must be pushed back into position
the exact second.
CHRONOGRAPH BASIC FUNCTIONS (fig. 2)
Pushers:
A. Chronograph start/stop
B. Split timing, zero reset
Chronograph indications:
G. Hours counter
H. Seconds counter
J. 30 min- counter
1. Start: Press push-button A.
2. Stop: To stop the timing, press
pushbutton A once more. Read the
three chronograph hands:
HOURS (G) / MINUTES (J) / SECONDS (H)
3. Zero positioning (reset):
Press push-button B. The three
chronograph hands (G, H, J) will be
reset to their zero positions.
4. Pull out the crown to position
(the watch continues to run).
5. Turn the crown clockwise until the
desired date is reached.
6. Push the crown back into position I.
Note: To avoid any damages on the
I
movement, do not perform the DATE
SETTING between 9.00 p.m. and
3.00 a.m. when the date mechanism is
in action.
I
at
II