General Guidelines - Tiiwee TWWS02 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

General Installation Guidelines

GENERAL GUIDELINES:

Do not install the Door/Window sensors on breakable material, but
choose instead the frame of a window to attach your Door/window
sensor.
Do not install on instable parts.
Do not install the sensor near magnetic parts - that might trigger the
alarm by accident.
Clean the surface before installation if the tape will be used for
attachment.
It is important that the sensor and the magnet are placed on the door
and frame respectively to allow an alarm to be triggered when sensor
and magnet are separated.
Installation of the Door & Window Sensor
IMPORTANT - PLEASE NOTE:
• It is important that the sensor and magnet are aligned correctly. Align
the small triangle markers at the sides of the sensor and magnet for
perfect operation
• The distance between the sensor and the magnet should not exceed
8mm.
Installation examples
Various installation examples are shown at the first page of this manual.
Copyright © 2019 Tiiwee. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever.

Publicidad

Tabla de contenido
loading

Tabla de contenido