Uline Н-7587 Instrucciones De Ensamble página 3

Figure 4
5
4
Frame
Sill
Figure 5
8
Figure 6
Figure 7
PAGE 3 OF 9
ASSEMBLY CONTINUED
5. Place door and frame assembly (4 and 5) over the locker body.
Attach top to frame header, bottom to frame sill (one bolt each),
and secure side of door frame to sides. (See Figure 4)
Frame
Header
6. Check and tighten all bolts.
JOINING UNITS TOGETHER
1. If joining unit on top of another, attach brackets (8) to bottom of
side panels on top locker with bolts and nuts. (See Figure 5)
2. Insert Phillips head bolts and washers up through holes in top of
bottom locker and through threaded holes in bracket. Tighten
fully. (See Figure 6)
Bottom
Locker
3. If joining units side by side, bolts will go through holes in
adjoining side panels in both lockers. Secure bolts with nuts.
(See Figure 7)
1-800-295-5510
uline.com
NOTE: If joining units beside or on top of one another, skip
to Joining Units Together.
0321 IH-7587