Cautions For Use; Declaration Of Conformity - Würth 0715 53 761 Manual De Instrucciones

3. Unable to capture photos/video.
Please check the status of the SD card. Users will not be able to capture photos or video if the SD card is not
installed properly or if it is full, write protected or damaged.
• The videoscope probe contains a series of small wires that control the optics and electronics of the camera tip.
• To ensure long-term reliability, do not bend the videoscope probe more than 180 degrees, and always bend
the videoscope probe in an arc as large as possible during usage and storage.
• Camera lens cleaning.
• User may clean the camera lens with a cotton swab and small amount of cleaning naphtha.
• Do not remove the SD card during capturing photos or video.
• This can cause a loss of the image or video and may damage the SD card.
• Video recording requires an SD card with fast writing speed.
• We recommend 80X (or above) writing speed SD cards for better video quality.
• The videoscope is designed for industrial use only. Do not use the system for human or any other biological
inspection.
• Do not insert the videoscope probe into any flammable gas or liquid to avoid dangers.
• Do not use the videoscope in fuel tanks or other dangerous environments such as a gasoline or alcohol storage
tanks.
• Do not use any corrosive liquid for cleaning, such as alcohol.
• Do not try to disassemble the product. This presents a shock hazard and could damage the unit.
• Do not bend the videoscope probe over 180 degrees during usage or storage.
• Please use only recommended components or accessories. Unapproved accessories and components may
cause damage.
• Please do not use the videoscope in a medical facility or on an airplane, as the wireless signal may interfere
with other critical equipment nearby.
• Avoid long term direct exposure to sunlight
• Store the system in a cool, dry and well-ventilated place.
We declare under our sole responsibility that this product is in conformity with the following standards or normati-
ve documents.
EN55011:2007 (Group 1, Class A), EN61000-3-2:2006, EN61000-3-3:1995 + A1:2001 + A2:2005,
EN61000-6-1:2007, IEC 61000-4-2:1995 + A1:1998 + A2:2001, IEC 61000-4-3:2006, IEC 61000-4-
4:2004, IEC 61000-4-5:2005, IEC 61000-4-6:2007, IEC 61000-4-8:1993 + A1:2000 and IEC 61000-4-
11:2004. According to the provisions of the regulation 2004/108/CE.
Würth International AG
18
VIDEOSCOPE PROBE

CAutIONS FOR uSE

DECLARAtION OF CONFORMItY